STEEL STRAPPING
STANDARD QUALITY A Cold - rolled, low - carbon strapping manufactured from a special grade of steel and tempered to meet the requirements of tensional strapping most standard packaging applications use these grade strapping.		HI - TENSILE, SUPER 95 AND SUPER 120 A Cold - rolled, medium - carbon, high - manganese steel strapping that is heat treated with a special process to produce a product that combines the fine surface and controlled physical properties with high strength and excellent shock resistance.

STRAP SIZE FOOTAGE YIELD COIL WINDING Strap Code STRAP FINISH Width Thickness Inch mm inch mm G m/kg R:Ribbon a 1/21/2 12.7 0.020 0.51 25 19.8 M 1220  B/W, P/W, Z/W 0.023 0.58 24 17.4 M 1223 5/8 15.9 0.020 0.51 25 15.8 M 5820  B/W, P/W, Z/W 0.023 0.58 24 13.9 M 5823 3/4 19.0 0.020 0.51 25 13.2 M 3420       B/W, P/W, Z/W 0.023 0.58 24 11.6 M 3423 0.025 0.64 23 10.5 M 3425 0.028 0.71 22 9.5 M 3428 0.031 0.79 21 8.5 M 3431 0.035 0.89 20 7.5 M 3435 0.040 1.02 19 6.6 M 3440 1 25.4 0.028 0.71 22 7.1 M 10028    B/W, P/W, Z/W 0.031 0.79 21 6.3 M 10031 0.035 0.89 20 5.6 M 10035 0.040 1.02 19 4.9 M 10040 1 - 1/4 31.8 0.031 0.79 21 5.1 M 11431   B/W, P/W, Z/W 0.035 0.89 20 4.5 M 11435 0.040 1.02 19 3.9 M 11440

* Other thickness ranging from 0.40mm to 1.10mm: available

COIL WINDING "Hankook" strapping is produced in two basic coil windings. MILL WOUND The strapping is oscillated uniformly and tightly across the 67+mm width of the coil. RIBBON WOUND Each layer is wound directly over the one below it so that the width of the strapping is the width of the coil. COIL SIZES Inside diameter (I.D): 16" (406mm) Outside diameter (O.D.): Mill wound coils measure 23 - 1/2" (600Max). Those which are ribbon wound vary from 23 - 1/2" to 1/8" (600mm to 711mm) depending on strap size. STANDARD MULTI- COIL SKIDS Twelve mill wound coils make up a standard skid. The number of ribbon coils will vary with strapping width.

<< Back to PACKAGING MATERIALS DIVISION